Preparation of novel,high‐modulus,swollen‐ or jungle‐gym‐type polyimide gels end‐crosslinked with 1,3,5‐tris(4‐aminophenyl)benzene

A novel preparation approach for high‐performance polyimide gels that are swollen or have a jungle‐gym‐type structure is proposed. A new rigid and symmetric trifunctional amine, 1,3,5‐tris(4‐aminophenyl)benzene (TAPB), was synthesized as a crosslinker. Three different kinds of amic acid oligomers derived from pyromellitic dianhydride (PMDA), 4,4′‐oxydiphthalic anhydride (ODPA), p‐phenylenediamine (PDA), and 4,4′‐oxydianiline (ODA) were end‐crosslinked with TAPB at a high temperature to make polyimide networks with different structures. Transparent polyimide gels were obtained from the ODPA–ODA/TAPB series with high compression moduli of about 1 MPa at their equilibrium swollen states in N‐methylpyrrolidone. Microscopic phase separation occurred during the gelation–imidization process when polyimide networks were generated from PMDA–PDA/TAPB and PMDA–ODA/TAPB. After these opaque polyimide networks were dried, a jungle‐gym‐like structure was obtained for the PMDA–PDA/TAPB and PMDA–ODA/TAPB series; that is, there was a high void content inside the networks (up to 70%) and little volume shrinkage. These polyimide networks did not expand but absorbed the solvent and showed moduli as high as those of solids. Therefore, using the highly rigid crosslinker TAPB combined with the flexible monomers ODPA and ODA and the rigid monomers PMDA and PDA, we prepared swollen, high‐performance polyimide gels and jungle‐gym‐type polyimide networks, respectively. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 2501–2512, 2002     

New Synthetic Method for Bicyclic Compounds Through a Sequence of Ene-Type Chlorination,Palladium Catalyzed Dehydrochlorination,and Intramolecular Diels-Alder Reaction

A sequence of ene-type chlorination, palladium catalyzed dehydrochlorination, and the intramolecular Diels-Alder reaction afforded a new method for conversion of prenyl derivatives into bicyclic compounds.     

A Puckered Singlet Cyclopentane‐1,3‐diyl: Detection of the Third Isomer in Homolysis

In the photochemical denitrogenation of 1,4‐diaryl‐2,3‐diazabicyclo[2.2.1]heptane ( AZ6 ) bearing sterically hindered substituents, a curious new absorption band at about 450 nm was observed under low‐temperature matrix conditions, together with the previously well‐characterized planar singlet diradical pl‐¹ DR6 with λ_max=≈580 nm. The 450 nm species was electron paramagnetic resonance (EPR)‐silent. Instead of generating the planar diradical pl‐¹ DR6 and the precursor azoalkane AZ6 upon warming, the ring‐closed bicyclo[2.1.0]pentane derivative SB6 , that is, the AZ6 denitrogenation product was identified. Based on product analysis, low‐temperature spectroscopic observations, high‐level quantum‐mechanical computations, viscosity effect, and laser‐flash photolysis, the puckered singlet diradicaloid puc‐¹ DR6 was assigned to the new 450 nm absorption. The latter was detected experimentally at the same time as the planar singlet diradical pl‐¹ DR6 . Sterically demanding substituents as well as viscosity impediments were essential for the detection of the experimentally hitherto unknown puckered singlet cyclopentane‐1,3‐diyl diradicaloid puc‐¹ DR6 , that is, the third isomer in homolysis. The present findings should stimulate future work on the mechanistically fascinating stereoselectivity documented in the formation of bicyclo[2.1.0]pentanes during the 2,3‐diazabicyclo[2.2.1]heptane denitrogenation.     

Brush‐First ROMP of poly(ethylene oxide) macromonomers of varied length: impact of polymer architecture on thermal behavior and Li+ conductivity

The properties of polymeric materials are dictated not only by their composition but also by their molecular architecture. Here, by employing brush‐first ring‐opening metathesis polymerization (ROMP), norbornene‐terminated poly(ethylene oxide) (PEO) macromonomers ( MM‐n , linear architecture), bottlebrush polymers ( Brush‐n , comb architecture), and brush‐arm star polymers ( BASP‐n , star architecture), where n indicates the average degree of polymerization (DP) of PEO, are synthesized. The impact of architecture on the thermal properties and Li⁺ conductivities for this series of PEO architectures is investigated. Notably, in polymers bearing PEO with the highest degree of polymerization, irrespective of differences in architecture and molecular weight (~100‐fold differences), electrolytes with lithium bis(trifluoromethanesulfonyl)imide (LiTFSI) as an Li⁺ source exhibit normalized ionic conductivities (σ_n) within only 4.9 times difference (σ_n = 29.8 × 10^?5 S cm^?1 for MM‐45 and σ_n = 6.07 × 10^?5 S cm^?1 for BASP‐45 ) at a concentration of Li⁺ r = [Li⁺]/[EO] = 1/12 at 50 °C. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 448–455     

Statistics of reaction progress variable and mixture fraction gradients of a pulverised coal jet flame using Direct Numerical Simulation data

The statistical behaviour of the variances, covariance and gradients of the reaction progress variable (c), and the mixture fraction (ξ) have been analysed in a pulverised coal jet flame using a three-dimensional carrier phase direct numerical simulation (DNS) dataset. It has been observed that the Favre-probability density functions (PDFs) of c and ξ can be parametrised by the standard β function. Furthermore, the log-normal distribution has been found to accurately represent |?c| and |?ξ|. It is also found that ?c and ?ξ remain aligned throughout the flame brush. Finally the joint PDF of |?c| and |?ξ| has been compared with the product of the PDF of |?c| and PDF of |?ξ| extracted from carrier phase DNS, and it has been found that |?c| and |?ξ| are not statistically independent in the case investigated.The bivariate log-normal distributions with and without correlation have also been considered, and the former is found to be in better agreement with the carrier phase DNS data.     

Mn(III)-based reaction of alkenes with quinolinones. Formation of peroxyquinolinones and quinoline-related derivatives

The reactions of 1,1-disubstituted alkenes with 4-hydroxyquinolin-2(1H)-ones under both Mn(III)-catalyzed aerobic oxidation conditions at room temperature and Mn(III)-mediated oxidation conditions at reflux temperature are described. The Mn(III)-catalyzed aerobic oxidation afforded bis(hydroperoxyethyl)quinolinones and azatrioxa[4.4.3]propellanes, while the oxidation with Mn(OAc)₃·2H₂O produced furo[3,2-c]quinolin-4-one analogues. The existence of a substituent at the 3-position of the 4-hydroxyquinolin-2(1H)-ones prevented a double reaction with the alkenes, and (endoperoxy)quinolinones and/or (hydroperoxyethyl)quinolinones were obtained under the Mn(III)-catalyzed aerobic conditions, while furo[3,2-c]quinolinone hemiacetals and vinylquinolinones were selectively produced under the Mn(III)-mediated oxidation conditions depending on the reaction temperature and times. Cyclic assembly of quinolinone-related 1,3-dicarbonyl compounds such as dihydropyridinones, pyranones, and dimedone derivatives was also examined under elevated temperature conditions.     

Genetic optical design for a compressive sensing task

We present a sophisticated optical design method for reducing the number of photodetectors for a specific sensing task. The chosen design parameter is the point spread function, and the selected task is object recognition. The point spread function is optimized iteratively with a genetic algorithm for object recognition based on a neural network. In the experimental demonstration, binary classification of face and non-face datasets was performed with a single measurement using two photodetectors. A spatial light modulator operating in the amplitude modulation mode was provided in the imaging optics and was used to modulate the point spread function. In each generation of the genetic algorithm, the classification accuracy with a pattern displayed on the spatial light modulator was fed-back to the next generation to find better patterns. The proposed method increased the accuracy by about 30 % compared with a conventional imaging system in which the point spread function was the delta function. This approach is practically useful for compressing the cost, size, and observation time of optical sensors in specific applications, and robust for imperfections in optical elements.     

Hardness and slip systems of orthorhombic hen egg-white lysozyme crystals

Hardness and slip systems by an indentation method were investigated on different habit planes of orthorhombic hen egg-white lysozyme (O-HEWL) crystals containing water. A dependence of the hardness on the water-evaporation time exhibits three stages as incubation, transition and saturated ones, as tetragonal (T)-HEWL crystals reported previously. The hardness values of (1 1 0), (0 1 0) and (0 1 1) habit planes of O-HEWL in the incubation stage or wet condition exhibits 6, 8 and 10 MPa, respectively. The hardness depends on indented planes but it is independent of the air-humidity and crystal volumes. These values correspond to the intrinsic hardness for O-HEWL crystals containing water. In the incubation stage, the slip traces are clearly observed around the indentation mark and the corresponding six kinds of slip systems are identified to be {0 1 1}<1 0 0>, {1 1 0}<1 1 0>, {0 1 1}<0 1 1>, {1 1 0}<0 0 1>, {1 0 0}<0 0 1> and {0 1 0}<0 0 1>.     

Selective Host–Guest Interactions of a Transformable Coordination Capsule/Tube with Fullerenes

An M₂L₄ coordination capsule or an M₂L₂ coordination tube was selectively formed by the combination of Hg^II hinges and bent bispyridine ligands. The two structures reversibly interconvert at room temperature in response to modulation of the metal‐to‐ligand ratio and exhibit different host–guest interaction behavior. The capsule alone encapsulates large spherical molecules, fullerenes C₆₀ and C₇₀, and the bound guests are released upon capsule‐to‐tube transformation by the simple addition of metal ions.     

Morphological studies of a hydrogen-bonded LC polymer obtained by photopolymerization in LC solvents

Anisotropic morphologies and the phase behaviour of a hydrogen-bonded LC polymer obtained by photopolymerization in two kinds of LC solvent are discussed. The hydrogen-bonded LC monomer, 4-(6-acryloyloxyhexyloxy) benzoic acid (A6OBA), was photopolymerized in 4-cyano-4′-hexyloxybiphenyl (6OCB) and in 4-cyano-4′-undecyloxybiphenyl (11OCB), which show a nematic phase and a smectic A phase, respectively. After photo-polymerization, the LC media were removed by extraction and the pure polymer was observed by scanning electron microscopy. SEM images showed that the polymer possessed fibrous morphology with a fibre diameter of a few micrometers, based on polymerization-induced phase separation. The overall geometries reflected typical LC characteristics such as schlieren and focal-conic fan textures. It was found that the hydrogen bond between benzoic acid groups in the monomer was rigid enough to fix the anisotropic phase-separated structure forming during the early stage of phase separation; however, it could not permanently maintain the fibre structure due to dissociation at elevated temperature. X-ray measurements revealed that a well developed layer structure of the hydrogen-bonded mesogen existed in the polymer obtained from the smectic phase of 11OCB, whereas a polymer layer structure could develop only partially from the nematic phase of 6OCB.